The suggested configuration does not assume that the terminal server operates also as file server for users working on it. In a case when such solution is necessary, number of required hard disks must be increased in proportion to that suggested below.
The set of minimum requirements for database server per user/users is presented in the below table.
| Physical Processor | Up to 40 users: 4-Core Up to 60 users: 6-Core Up to 80 users: 8-Core Up to 100 users: 10-Core |
| Virtual Processor* | Up to 20 users: 1-vCPU + 1-vCPU / 5 users Over 20 users: 1-vCPU + 2-vCPU / 10 users |
| RAM | 0.7 GB / user |
| HDD | 0.5 GB / user + 40 GB for operating system / 2 x SAS 15000 rpm |
| RAID | RAID 1 |
| NIC | 100 Mb/s |
| Operating System | Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2016 Standard Microsoft Windows Server 2017 Standard |
* Refers to virtualized environments based on Hyper-V
If more than one server supports terminal connections, the infrastructure must be properly configured, taking into account the resource load balancing
Comarch ERP Standard system can be installed in 32- or 64-bit infrastructure.
Example
Minimum requirements for terminal server on which 50 Comarch ERP Standard users will be working:
- CPU: 1 x 6-Core / 11-vCPU
- RAM: RAM: 40 GB (includes 5 GB for the operation of Windows system)
- HDD: 120 GB (includes virtual memory on the level of 1,5 x amount of RAM memory)
Note
Each additional integration and application increases the demand for the terminal server’s resources.
Note
Due to the fact that sessions of operators using BI reports require significantly increased RAM, this requirement must be respectively taken into account while designing or changing the infrastructure for the needs of Comarch ERP Standard system. BI operator session may occupy even three times more of RAM than session of an operator not using BI.
Czy ten artykuł był pomocny?
( 1 )
( 0 )