Receipt printer

Supported receipt printers

Comarch webPOS cooperates with the following models of receipt printers:

Note

It is required to define the mapping of VAT rates for a given POS workstation in the ERP system.

In order to configure the receipt printer, right-click the local component and select the [Receipt Printer] button.

The Driver settings section of the Receipt Printer window allows you to enter the following data:

Driver File – use the [Select driver] button to select the B2.Printer2.dll file, containing receipt printer drivers. The file is stored in the bin\Drivers directory in Comarch webPOS local component installation folder; it allows you to integrate the application with a number of receipt printer models.
Available Printers – in this field, select a printer model from the list of models made available by the driver file
Device Address/Port – in this field, enter the TCP/IP address or COM port to which the receipt printer is connected

The Additional Parameters section contains optional parameters:

Print Receipt\Invoice Number – allows you to print the system numbers of receipts in document printouts
Print Item Discount – allows you to print the value of a discount granted on a given document item
Print Document EAN as Barcode – prints document UPC numbers as barcodes
Print Debit Memo – prints debit memos on a receipt printer that supports this feature. The parameter is enabled automatically once such a printer is installed.
Print Invoices on Receipt Printer – prints invoices on a receipt printer that supports this feature
Print Customer’s TIN – prints the TIN number of a customer selected in a sales document on a receipt printer that supports this feature
Print Cashier and POS Code – prints the code of a cashier and workstation. Cashier codes are defined in the ERP system.
Print TIN in Cashier’s Line – prints the TIN number of a customer in the cashier’s line, following the point of sale’s number and cashier code, in the case where the printer does not support printing TIN numbers
Diagnostic Mode – additional logging

The lower part of the Receipt Printer window contains the following buttons:

[Select Driver File] – allows you to select a driver to configure the receipt printer
[Test Connection] – verifies connection with the receipt printer
[Save and Close] – saves and closes the Receipt Printer window